An Item Was Added To Cart!

You May Also Like

Self-Adhesive Non-Reflective Hazard Warning Tape - Black & Yellow - 66m x 60mm
£11.24 Ex. VAT
£13.49 Inc. VAT
Kerb Ramps - Pack of 2 (4" Rise)
£24.99 Ex. VAT
£29.99 Inc. VAT
Non Adhesive Barrier Tape - Red/White - 500m x 75mm
£9.99 Ex. VAT
£11.99 Inc. VAT

Best Practices for Setting Up and Maintaining Water Filled Barriers on UK Roads

Water filled barriers are a crucial safety feature on UK roads. They are used to protect drivers, passengers and pedestrians from accidents and provide a barrier between road works and live traffic. With proper setup and maintenance, water filled barriers can last for years and provide reliable protection. In this blog, we will discuss the best practices for setting up and maintaining water filled barriers on UK roads.

Water Filled Barriers Construction Project Traffic Flow Cones Barriers Road Signs Temporary Road Work Maintenance Management Water filled barriers UK roads Safety feature Protect drivers Passengers Pedestrians Setup Maintenance Construction project Traffic flow Cones Barriers Road signs Temporary road work Management Secure base Proper filling Regular inspections Proper storage Durability Street Solutions UK
  1. Choosing the Right Location

The location of the barriers is crucial to their effectiveness. They should be positioned in such a way that they provide maximum protection to drivers, passengers and pedestrians. When setting up barriers, it is important to consider the speed limit, the volume of traffic and the proximity of pedestrian crossings.

  1. Secure Base

The barrier must be placed on a secure base to prevent it from moving or tipping over in the event of a collision. A solid concrete base is recommended for long-term installations. If the barrier is being placed on an unstable surface, such as a slope or soft ground, additional measures such as anchoring should be taken to ensure stability.

  1. Proper Filling

It is important to fill the barriers with the correct amount of water to ensure stability and durability. Overfilling or underfilling the barriers can lead to structural failure in the event of a collision. It is recommended to follow the manufacturer's guidelines for the correct amount of water to be added to the barriers.

  1. Regular Inspections

Regular inspections are necessary to ensure the barriers are in good condition and provide adequate protection. Check the barriers for any damage, leaks or cracks. If any damage is found, it should be repaired immediately to prevent further damage and ensure the barrier continues to provide protection.

  1. Proper Storage

When not in use, water filled barriers should be properly stored to prevent damage. This includes storing them in a covered, secure area and draining the water to prevent cracking and other damage to the barrier material.

In conclusion, water filled barriers are a crucial safety feature on UK roads and must be properly setup and maintained to ensure they provide the necessary protection. By following these best practices, you can ensure that your water filled barriers are reliable and provide the maximum level of protection.

Leave a comment