All Yellow Speed Bump Complete Kit 50mm - 10mph or 75mm - 5mph

This speed ramp kit from Street Solutions UK features rock solid design; Our speed bumps are designed to be life proof, withstanding but not limited to use from cars and HGV’s; If you need a heavy duty speed ramp kit that will hold up under any conditions, look no further.

The selected speed bump here comes in the classic yellow, proving a high quality speed bump look whilst offering maximum control of speeding vehicles.

We have two heights of speed bump kits available and many different lengths to suit your needs. The different speed bump heights can be used to reduce vehicles to either or . The different heights are also better suited to different classes of vehicles and applications.

- 75mm Speed ramp kits are perfect for slowing larger vehicles, such as trucks, HGVs and Lorries.

With the nature of the vehicles using the 75mm speed bump kits we've found that they are most commonly used for industrial estates, business parks, waste centres and similar locations with a high volume of large and heavy good vehicles.

- 50mm Speed ramp kits are more of an all rounder size, better suited to use with cars and bikes with a slightly easier transition for the vehicles.

With the nature of the vehicles using the 50mm speed bump kits we've found that they are most commonly used for schools, colleges, shopping centres, retail parks and similar locations with a high volume of cars and bikes.

Step 1: Place the speed bump sections in your desired positions, these should be on a level flat ground with all debris and dirt cleared.

Step 2: Once positioned you will need to apply pivot holes for the speed bumps by drilling through the fixing holes.

Step 3: Remove the speed bump sections from their placements and continue to drill down into the ground with the required depth, that will allow the fixing bolt to fit fully into the ground with no overhang.

Step 4: Clean out the drilled holes and inset the outer housing of the fixing bolts so they are level with the ground.

Step 5: Place the speed bump sections back into the their permanent positions and continue to insert the bolts into their correct housings until the speed bumps are fixed securely in place with no movement.