Loading...
Prosolve | SKU:
175002
10mm Bullnose Corner - 40mm (Satin Silver)
£3.89
Ex. VAT
£4.67
Inc. VAT
Why buy from us
- Pay in 30 days with a Trade Account. No fees.
- Trade and bulk pricing available on request
- UK stock, dispatched fast
10mm Bullnose Corner - 40mm (Satin Silver) is backordered and will ship as soon as it is back in stock.
Ships in
1 – 5 working days
Quote in 3 hours
No account needed
- Made in the UK
- Pay in 30 days with Klarna. No fee. Learn more
- Next Day Delivery Available
10mm Bullnose Corner - 40mm (Satin Silver)
Regular price
£4.67
Unit price
Unavailable
10mm Bullnose Corner - 40mm (Satin Silver) is backordered and will ship as soon as it is back in stock.
Why it works
Why trim the edge
Covers the raw core
A cut worktop exposes bare chipboard, which swells the first time it gets wet. The joint seals that edge behind aluminium.
Sized for a 600mm worktop
At 630mm it runs the full depth with a little to trim off, rather than leaving a gap at the back.
Carries the bullnose through
The curve continues across the joint instead of breaking at the corner, which is what a standard-profile strip would do.
Seals the join
A corner join sits where water collects. The strip and a bead of sealant keep it out of the chipboard.
Overview
Sealing the cut edge
A bullnose corner is the fiddliest joint in a worktop run: two curved front edges meeting at 90 degrees, both site cut, both about to be wiped over every day. A profiled strip is what makes that join look deliberate rather than approximate. It follows the bullnose through the corner, seals the cut line against water getting into the chipboard, and puts 4mm of aluminium where two laminate edges would otherwise be knocking together.
630mm
Length
4mm
Aluminium thickness
0.4kg
Weight
40mm
Worktop thickness
| Dimensions | |
|---|---|
| Length | 630mm |
| Thickness | 4mm |
| Worktop thickness | 40mm |
| Weight | 0.4kg |
| Details | |
|---|---|
| Profile | 10mm Bullnose |
| Type | Corner joint |
| Material | Aluminium |
| Colour | Satin Silver |
| Fixing | Pre-drilled, screws to the cut edge |
| Sold as | Single trim |
Frequently asked questions
What does the "10mm Bullnose" mean?
What does the "10mm Bullnose" mean?
It is the shape of the worktop's front edge. Postformed worktops come with different front-edge profiles, and the trim has to match yours or it will not sit flush. Check the front edge of your worktop before ordering.
What worktop thickness does it fit?
What worktop thickness does it fit?
40mm. Standard kitchen worktops are usually 38mm to 40mm, and 30mm is the slimmer option, so measure yours rather than assuming.
Why is it 630mm when my worktop is 600mm deep?
Why is it 630mm when my worktop is 600mm deep?
So there is something to trim. Worktop depths vary a little and a run is rarely perfectly square to the wall, so the extra 30mm gets cut off on site for a clean fit.
What is it made from?
What is it made from?
Aluminium, 4mm thick, in a hardwearing easy-clean finish.
How does it fix on?
How does it fix on?
It is pre-drilled, so it screws to the cut edge of the worktop. Most fitters bed it on a thin line of sealant as well, which keeps water out of the chipboard core.
What is the difference between this and an end cap?
What is the difference between this and an end cap?
An end cap finishes an exposed cut end at the end of a run. This joint goes between two worktops where the run turns a 90 degree corner. They are not interchangeable.
Will it fit a standard-profile worktop?
Will it fit a standard-profile worktop?
No. This one is shaped for a 10mm bullnose front edge. On a standard-profile worktop it will not sit flush, and you want the 12mm standard corner joint instead.
