619 No Motorised Vehicles sign face for junctions, sites and shared paths
This 619 sign face prohibits motor vehicles - cars, motorcycles, mopeds and scooters - while still permitting bicycles and horse-drawn carriages. It is manufactured to BS EN 12899-1:2007 and CE marked, with Class 2 R2/RA2 reflectivity for visibility in low light. It is supplied as the sign face only, in four sizes and two mounting styles, for use on public highways and private sites.
Key features
-
TSRGD diagram 619 - manufactured to BS EN 12899-1:2007 and CE marked.
-
Class 2 R2/RA2 reflectivity - stays clearly visible to drivers in low light.
-
Wall mounted or post mounted - post mounted signs are supplied with rear channels for anti-rotational clips.
-
3mm aluminium composite sign face, red, white and black.
-
Four sizes - 300mm, 450mm, 600mm or 750mm.
- Sign face only - posts and clips are sold separately.
Where it is used
- Shared paths and routes open to bicycles but not motor vehicles
- Pedestrianised or part-pedestrianised streets
- Private sites restricting motor vehicle access
- Access roads and yards with mixed cycle and pedestrian use
Sizes and mounting
Choose 300mm or 450mm for lower-speed sites and narrower paths, or 600mm and 750mm where the sign needs to be seen from further away or at higher approach speeds. Each size is available wall mounted or post mounted: the wall mounted face has no pre-drilled holes, ready for screw or adhesive fixing, while the post mounted face is supplied with rear channels for anti-rotational post clips. If the site needs to be closed to bicycles and horse-drawn carriages as well, the equivalent diagram 617 "all vehicles prohibited" sign face covers that instead; where only motorcycles, mopeds and scooters need to be restricted, diagram 619.2 is the closer match.
Specification
| Specification |
Detail |
| Diagram reference |
619 |
| Sizes |
300mm, 450mm, 600mm or 750mm |
| Mounting |
Wall mounted or post mounted (c/w rear channels) |
| Reflectivity |
Class 2 R2/RA2 |
| Sign face thickness |
3mm |
| Material |
Aluminium composite |
| Sign face colour |
Red, white and black |
| Sign rear colour |
Grey |
| Compliance |
BS EN 12899-1:2007, CE marked |